INTRODUCTION:

- One-of-a-kind App that gives you compatibility with Serial Devices like CP210X, FTDI, PL2303, CH34X and CDC/ACM devices.
- This app can send and receive commands via Serial Devices so you can debug your hardware problems easily.

- Connect your Serial Devices to Mobile using OTG-Cable.


FEATURES:

- Baud Rate, Data Bits, Parity Checks, and Stop Bits setting Option
- Separate panels for sending and receiving data.
- Custom your own buttons for frequent sending of same data.
- Monitoring receiving data as ASCII or HEX.
- Sending Data as ASCII or HEX.
- Selection for r n at the end of sending data.
- Simple copy option in sent data just long press on data.
- Send Log file of Received and Sent data.
- Keep Screen on/off option.
- Font Size option.
- Remove Ads option.


NOTE:

- Android device must support USB Host mode.
- By default, Received data in ASCII format and It can be changed from top MENU.
- By default, Data sent in ASCII format and It can be changed from long pressing of particular Button.
- By default, rn will be sent on every sending data and It can be changed from long pressing of particular Button.